View B84143B0150R110_4543632.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMC filters
3-line filters
for converters and power electronics
Rated current 8 to 200 A
Series/Type: Date: B84143B*R110 January 2006
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS' prior express consent is prohibited.
3-line filters for converters and power electronics
Power line filters for 3-phase systems Rated voltage 520/300 V AC, 50/60 Hz Rated current 8 to 200 A Construction
3-line filter Metal case Book size
B84143B*R110
Features

Very high insertion loss
Optimized leakage current
Space saving by optimized footprint
Litz wires on the load side reduce mounting time
Low weight
Degree of protection: IP 201)
Optimized for long motor cables and operation
under full load Design complies with EN 133200, UL 1283, CSA C22.2 No.8 UL and cUL approval pending Applications
Frequency converters for motor drives, e.g.
elevators, pumps, traction systems, conveyor systems, HVAC systems (heating, ventilation and air conditioning) Wind farms Power supplies Terminals
Line side: Finger-safe terminal blocks Load side: Litz wires
Marking Marking on component: Manufacturer's logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging: Manufacturer's logo, ordering code
1) To IEC 60529
Please read Cautions and warnings and
Important notes at the end of this document.
2
01/06
3-line filters for converters and power electronics
Typical circuit diagrams Filters for 8 and 16 A
LINE L1 L2 L3 LOAD L1' L2' L3'
B84143B*R110
SSB1526-A
Filters for 25 ... 200 A
LINE L1
L2 L3
LOAD
L1' L2' L3'
SSB1527-I
Please read Cautions and warnings and
Important notes at the end of this document.
3
01/06
3-line filters for converters and power electronics
Technical data and measuring conditions Rated voltage VR Rated current IR Test voltage Vtest Overload capability (thermal) Leakage current Ileak Climatic category (IEC 60068-1) Approvals 520/300 V AC, 50/60 Hz
B84143B*R110
Referred to 40 C ambient temperature 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) 1.5 * IR for 3 min per hour or 2.5 * IR for 30 s per hour At 480 V AC, 50 Hz 25/100/21 (- 25 C/+ 100 C/21 days damp heat test) UL 1283 and CSA C22.2 No.8 pending
Characteristics and ordering codes VR AC IR Terminal cross section Ileak Line side: Load side: terminal litz blocks wires mm2 mA mm2 8 16 25 36 50 66 90 120 150 200 4 4 6 6 16 25 25 50 50 95 1.5 2.5 4 6 10 16 25 35 35 70 / 351) < 14 < 14 < 14 < 14 < 14 < 14 < 14 < 14 < 14 < 14 Rtyp Approx. weight Ordering code
V 520/300
A
m 26 13 10 6.5 4.3 2.7 2.0 1.4 0.9 0.5
kg 1.5 1.5 2.7 3.2 3.7 4.3 7.7 8.3 9.7 13.5 B84143B0008R110 B84143B0016R110 B84143B0025R110 B84143B0036R110 B84143B0050R110 B84143B0066R110 B84143B0090R110 B84143B0120R110 B84143B0150R110 B84143B0200R110
1) PE litz wire
Please read Cautions and warnings and
Important notes at the end of this document.
4
01/06
3-line filters for converters and power electronics
Dimensional drawings B84143B0008R110, B84143B0016R110 (8 and 16 A)
50 200 30010 Litz wire
B84143B*R110
80
40
31 15
0.5
1
Wire end ferrule Litz wire markings
PE M6 x 24 Terminal blocks 4 mm 2 Tightening torque 0.6 ... 0.8 Nm 230 2150.5
L1' L1 L2' L2 L3 Marking L3' PE PE LINE LOAD
250.3
SSB2188-F-E
6.5
B84143B0025R110 (25 A)
60 250 40010
Litz wire
150
75
60 30
0.5
1
Wire end ferrule Litz wire markings
PE M6 x 24 Terminal blocks 4 mm 2 Tightening torque 0.6 ... 0.8 Nm 280 2650.5
L1 L2 Marking L3 PE LINE LOAD L1' L2' L3' PE
46
6.5
350.3
SSB2189-N-E
Please read Cautions and warnings and
Important notes at the end of this document.
5
01/06
56
3-line filters for converters and power electronics
B84143B0036R110 (36 A)
60 250 40010
B84143B*R110
Litz wire
150
75
60 30
0.5
1
Wire end ferrule Litz wire markings
PE M6 x 24 Terminal blocks 6 mm 2 Tightening torque 1.5 ... 1.8 Nm 280 2650.5
L1 L2 Marking L3 PE LINE LOAD L1' L2' L3' PE
6.5
300 50010 Litz wire
350.3
SSB2190-R-E
B84143B0050R110 (50 A)
60
150
75
52
30
0.5
PE M6 x 24 330
1
Wire end ferrule Litz wire markings 3150.5
L1 L2 Marking L3 PE LINE LOAD L1' L2' L3' PE
6.5
Terminal blocks 16 mm 2 Tightening torque 2 ... 2.3 Nm
350.3
SSB2191-Z-E
Please read Cautions and warnings and
Important notes at the end of this document.
6
01/06
56
56
3-line filters for converters and power electronics
B84143B0066R110 (66 A)
80 300 50010 Litz wire
B84143B*R110
150
75
52 30
0.5
1
PE M10 x 39 Terminal blocks 25 mm 2 Tightening torque 4 ... 4.5 Nm 330 3150.5
60 Wire end ferrule Litz wire markings
6.5
L1' L2' L3' PE
L1 L2 Marking L3 PE LINE LOAD
550.3
SSB2192-8-E
B84143B0090R110 (90 A)
80 300 50010 Wire end ferrule
Litz wire
200
100
52
30
0.5
1
PE M10 x 39 Litz wire markings Terminal blocks 25 mm 2 Tightening torque 4 ... 4.5 Nm
6.5
330 3150.5
L1 L2 Marking L3 PE LINE LOAD
L1' L2' L3' PE
550.3
SSB2193-G-E
Please read Cautions and warnings and
Important notes at the end of this document.
7
01/06
76
76
60
3-line filters for converters and power electronics
B84143B0120R110, B84143B0150R110 (120 and 150 A)
90 350
B84143B*R110
50010 Wire end ferrule
Litz wire
200
100
78
0.5
40
1
PE M10 x 39 Terminal blocks 50 mm 2 Tightening torque 6 ... 8 Nm
65 380 3650.5 Litz wire markings
6.5 650.3
50010 Litz wire
SSB2194-P-E
L1 L1' L2 Marking L2' L3 L3' PE LINE LOAD PE
B84143B0200R110 (200 A)
110 400 Wire end ferrule
220
110
79
30
0.5
1
86
PE M10 x 39 PE litz wire 35 mm 2 Terminal blocks 95 mm 2 Tightening torque 15 ... 20 Nm 430 4150.5
80 Litz wire markings
6.5
L1 L2 Marking L3 PE LINE LOAD L1' L2' L3' PE
850.3
SSB2195-X-E
Please read Cautions and warnings and
Important notes at the end of this document.
8
01/06
106
3-line filters for converters and power electronics
Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 8 and 16 A
120 dB B84143B0008R110 B84143B0016R110 100
SSB1528-R
B84143B*R110
Filters for 25 and 36 A
120 dB B84143B0025 ... B0036R110 100
SSB1529-Z
80
80
60
60
40
40
20
20
04 10
10 5
10 6
10 7
Hz 10 8 f
04 10
10 5
10 6
10 7
Hz 10 8 f
Filters for 50 A
120 dB B84143B0050R110 100
SSB1530-3
Filters for 66 A
120 dB B84143B0066R110 100
SSB1531-B
80
80
60
60
40
40
20
20
04 10
10 5
10 6
10 7
Hz 10 8 f
04 10
10 5
10 6
10 7
Hz 10 8 f
Please read Cautions and warnings and
Important notes at the end of this document.
9
01/06
3-line filters for converters and power electronics
Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 90 and 120 A
120 dB B84143B0090 ... B0120R110 100
SSB1532-J
B84143B*R110
Filters for 150 and 200 A
120 dB B84143B0150R110 B84143B0200R110 100
SSB1533-S
80
80
60
60
40
40
20
20
04 10
10 5
10 6
10 7
Hz 10 8 f
04 10
10 5
10 6
10 7
Hz 10 8 f
Please read Cautions and warnings and
Important notes at the end of this document.
10
01/06
EMC filters Cautions and warnings
Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences. Death, serious bodily injury and substantial material damage to equipment may occur if the appro priate safety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC filters may be used only for their intended application within the specified values in low voltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place of application must comply with all specifications for the filter used. Warnings
It shall be ensured that only qualified persons (electricity specialists) are engaged on work such

as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger of electric shock. EMC filters contain components that store an electric charge. Danger ous voltages can continue to exist at the filter terminals for longer than five minutes even after the power has been switched off. The protective earth connections shall be the first to be made when the EMC filter is installed and the last to be disconnected. Depending on the magnitude of the leakage currents, the particular specifications for making the protective-earth connection must be observed. Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen cies that may cause resonances etc. can lead to destruction of the filter housing. EMC filters must be protected in the application against impermissible exceeding of the rated currents by suitable overcurrent protective.
11
01/06
EMC filters Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
12
01/06

▲Up To Search▲

Price & Availability of B84143B0150R110

	To Download B84143B0150R110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .